Remote Controller Group And Address Setting - Fujitsu Airstage UTY-DCGYZ1 Operating Manual

1-2-2. Remote Controller Group and Address Setting
Address setting to this controller is required to assign the air conditioners with remote controller group.
Address is set automatically or manually for each refrigerant system.
Name
G Refrigerant system address (0-99):
H Indoor unit address (00 - 63):
J Remote controller address (0-15):
K R.C.G. address:
Example) Refrigerant system address=00
K
G
00 00
H
J
Refrigerant system address=01
K
01 00
En-6
This is the ID individually assigned to each refrigerant system and is used
for control.
This is the ID individually assigned to each indoor unit and is used for
control.
This is the group of indoor units that have been connected with remote
controller cable, or single indoor unit.
Remote controller group (R.C.G.) address is made up of the refrigerant
system address and the indoor unit address of indoor unit with remote
controller address "0".
(Hereafter Remote controller group is called "R.C.G.")
0 00 01 1
0 01 01 1
Description
00 02 2 00 03 0
01 02 2 01 03 0
00
G
00
00
01
G
01
01