Advertisement
6. SETTING THE REMOTE CONTROLLER
6.1. Initialization procedure
After remote controller installation work is complete, perform initialization
using the following procedures before starting to use the system.
(*: Items that indoor unit does not support are not displayed.)
6.2.1. Turn on the power ...................................... 5
Turn on the
power
6.2.2. Language Setting ....................................... 5
6.2.3. R.C. Master/Slave Setting ......................... 5
Setting of fi rst
6.2.4. Date and Time Setting ............................... 5
time start
6.2.5. Temp. Unit Setting...................................... 5
6.2.6. Password Default Setting .......................... 5
6.3.4. R.C. Group Name Setting .......................... 6
6.3.5. RC Sensor Setting* .................................... 6
6.3.6. Master Indoor Unit Setting ......................... 6
Initial setting
6.3.7. Password Setting (administrator password) .. 7
6.3.8. Display Item Setting ................................... 7
6.3.10. I.U. Display Number Setting* ..................... 7
Initialization end
6.4.1. Error History ............................................... 8
6.4.2. Setting Status List ...................................... 8
6.4.3. Filter Sign Reset* ....................................... 8
6.4.4. Version ....................................................... 8
6.4.5. Test Run ..................................................... 8
Other Settings
6.4.6. R.C. Address Setting.................................. 8
6.4.7. I.U. Address Verifi cation ............................. 8
6.4.8. Function Setting ......................................... 9
6.4.9. Installer Password Change ........................ 9
6.4.10. Initialization ................................................ 9
After installing this unit, perform the test run to confi rm that the unit is op-
erating properly. Then, explain the operation of this unit to the customer.
6.2. Setting of fi rst time start
6.2.1. Turn on the power
Recheck the wiring. Incorrect wiring will cause trouble.
When initially starting up this unit, the following setting screen will be
displayed. Settings confi gured at this stage can be changed afterwards.
If an error screen is displayed, shut down all
unit power, and check the connections. After
resolving the problem, turn on the power
again.
If "Please set the address correctly." is
displayed, touch [Close], and the "RC Ad-
dress Setting" screen (refer to 6.4.6) will be
displayed. After setting, please restart this
unit.
6.2.2. Language Setting
1.
The "Language Setting" screen has two pages. You can switch be-
tween the pages by touching [Next Page] or [Previous Page]. Touch
the language to be used.
Touch [OK] to
Language Setting
display the "R.C.
English
Master/ Slave
Setting" screen.
Deutsch
Cancel
CAUTION
Error
Code 01
Error (code:XX.X)
Please set the address correctly.
Close
Language Setting
Page 1/ 2
Français
Русский
Italiano
Język
Español
Português
Türkçe
polski
Next
Previous
OK
Cancel
Page
Page
6.2.3. R.C. Master/Slave Setting
1.
(a) If the remote controller is a single
connection, this setting is omitted. Pro-
ceed to "6.2.4. Data and Time Setting".
(b) If a remote controller has multiple con-
nections, and if "Master" is initially set,
all other units will be set to "Slave".
Please set only one Master remote controller. Units other than Master are
set to Slave automatically.
When remote controllers are set to "Slave", setting items will be restricted.
Touch [OK] to display the "Date and Time Setting" screen.
6.2.4. Date and Time Setting
1.
Touch the [Date] on the "Date and Time Setting" screen. The "Date"
screen is displayed.
2.
Touch [ ] or [ ] to set the year, month, and date. Touch [OK] to
return to the "Date and Time Setting" screen.
3.
Touch the [Time] on the "Date and Time Setting" screen. The "Time"
screen is displayed.
1.
Date and Time Setting
Thu 12:00AM
Date
Time
01/ 01/2015
12:00 AM
Date Format
Day/Month/Year
Time Format
12:00-11:59AM/PM
Summer Time Setting
Disable
Cancel
OK
4.
Touch [ ] or [ ] to set hours, minutes, and AM/PM. Touch [OK] to
return to the "Date and Time Setting" screen.
5.
Touch [OK] on the "Date and Time Setting" screen to display the
"Temp. Unit Setting" screen.
4.
Time
Thu 12:00AM
hour
min.
12
00
AM
Cancel
OK
6.2.5. Temp. Unit Setting
1.
Select and touch [°C] or [°F] and touch
[OK].
2.
Touch [OK] on the "Temp. Unit Setting"
screen to display the "Password Default
Setting" screen.
6.2.6. Password Default Setting
1.
Select and touch [Enable] or [Disable] and
touch [OK].
The initial value at "Change Setting" of
"6.3.7 Password Setting" is different de-
pending on the selection of commercial use
or residential use. Refer to the table below.
Function
(*: Items that indoor unit does not
support are not displayed.)
On Timer
Off Timer
Auto Off Timer
Weekly Timer
Set Temp. Auto Return
Set Temp. Range Setting
Anti Freeze*
Human Sensor Setting*
Fan Control for Energy Saving*
Initial Setting
Page 2/ 2
Maintenance
Ελληνικά
Dutch
2.
When initial start-up setting is complete,
the screen on the right will be displayed.
OK
This screen is the "Monitor mode screen",
which is the home screen of this unit.
R.C. Master / Slave Setting
Cancel
2.
3.
Date
Date and Time Setting
Thu 12:00AM
Date
Day
Month
Year
01/ 01/2015
Date Format
01
01
2015
Time Format
Summer Time Setting
Cancel
Cancel
OK
5.
Date and Time Setting
Thu 12:00AM
Date
Time
01/ 01/2015
12:00 AM
Date Format
Day/Month/Year
Time Format
12:00-11:59AM/PM
Summer Time Setting
Disable
Cancel
OK
Temp. Unit Setting
Cancel
Password Default Setting
(For Commercial Use)
(For Residential Use)
Cancel
Enable
(Commercial)
(Residential)
Off
Off
On
On
On
On
On
On
On
On
On
Mode
Set Temp.
Master
Slave
OK
Thu 12:00AM
Time
12:00 AM
Day/Month/Year
12:00-11:59AM/PM
Disable
OK
°C °C
°F °F
OK
Enable
Disable
OK
Disable
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off
Fri 10:00AM
Fan
Status
Menu
En-5
Hide quick links:
Advertisement
