Accessing An External Usb Device From A Computer - Epson WorkForce Pro WF-R5690DTWF User Manual

Hide thumbs Also See for WorkForce Pro WF-R5690DTWF:
Table of Contents

Advertisement

User's Guide
10. Push in the pop-out section.
11. Close the ink case.
12. Open the ink case on the opposite side of the printer, and then remove all of the ink supply units.
13. Pack the printer in its box, using the protective materials.
If print quality has declined the next time you print, clean and align the print head.
Related Information
"Part Names and Functions" on page 17
&
"Checking and Cleaning the Print Head" on page 125
&
"Aligning the Print Head" on page 127
&

Accessing an External USB Device From a Computer

You can write or read data on an external USB device such as a USB flash drive that has been inserted in the
printer from a computer.
Important:
c
❏ When sharing an external device inserted in the printer between computers connected over USB and over a
network, write access is only allowed to the computers that are connected by the method you selected on the
printer. To write to the external USB device, enter the Setup on the control panel, and then select System
Administration > Printer Settings > Memory Device Interface > File Sharing and a connection method. Data
can be read by computers connected over USB and over a network.
❏ To write to an external USB device connected to the computer over a network, enter the Setup on the control
panel, and then select System Administration > Printer Settings > Memory Device Interface > File Sharing >
Wi-Fi/Network.
Note:
It takes a while to recognize data from a computer if a large external USB device, such as 2TB HDD, is connected.
Windows
Select an external USB device in Computer or My Computer. The data on the external USB device is displayed.
Note:
If you connected the printer to the network without using the software disk or Web Installer, map a USB port as a network
drive. Open Run and enter a printer name \\EPSONXXXXX or a printer's IP address \\XXX.XXX.XXX.XXX to Open:.
Right-click a device icon displayed to assign the network. The network drive appears in Computer or My Computer.
Appendix
202

Advertisement

Table of Contents
loading

Table of Contents