Table of Contents
Advertisement
User's Guide
5. Remove the originals after scanning.
Note:
If you leave the originals on the scanner glass for a long time, they may stick to the surface of the glass.
Inserting an External USB Device
Inserting and Removing an External USB Device
1. Insert an external USB device into the printer.
2. When you have finished using the external USB device, remove the device.
Related Information
"External USB Device Specifications" on page 242
&
"Accessing an External USB Device From a Computer" on page 42
&
Accessing an External USB Device From a Computer
You can write or read data on an external USB device such as a USB flash drive that has been inserted in the
printer from a computer.
Important:
c
When sharing an external device inserted in the printer between computers connected over USB and over a
network, write access is only allowed to the computers that are connected by the method you selected on the printer.
To write to the external USB device, select a connection method from the following menu on the printer's control
panel.
Settings > General Settings > Printer Settings > Memory Device Interface > File Sharing.
Note:
It takes a while to recognize data from a computer if a large capacity external storage USB device, such as a device that is 2
TB, is connected.
Preparing the Printer
42
Advertisement
Table of Contents
