Table of Contents
Advertisement
Checking the Setting Information
• Fax Setting
To use the fax function, the following information is needed.
Item
Fax Number
Set the fax number of this machine. You can enter up to
20 digits.
Sender ID
Set the sender's information. You can enter up to
22 characters.
• Network Setting
To connect the machine to a network using a LAN cable, the following information is needed.
Item
IP Address
Set the IP address of the machine.
Subnet Mask
Set a subnet mask.
Default Gateway
Set a gateway address.
DNS Server (Primary)
Set the IP address for a Primary DNS server.
DNS Server (Secondary)
Set the IP address for a Secondary DNS server.
WINS Server (Primary)
Set the name (up to 15 characters) or the IP address for
the Primary WINS server.
WINS Server (Secondary)
Set the name (up to 15 characters) or the IP address for
the Secondary WINS server.
• E-mail Setting
To use functions which require sending and receiving E-mail such as the Scan To E-mail
and Internet Fax functions, the following information is needed.
Item
Mail Server Address
Set the IP address or host name for the SMTP server.
You can enter up to 64 characters.
Set Sender's Address (From)
It appears when sending E-mail.
Receive Setting
Set [POP3], [SMTP], or [Disable].
If [POP3] is selected, check the POP3 server address.
Authentication Method
Set [No Authentication], [SMTP Auth], or [POP Before
SMTP].
If [SMTP Auth] or [POP Before SMTP] is selected, check
the user name and password.
(SMTP-Auth / POP Before
Set a user name for authentication. Up to 64 characters
SMTP) Authentication Method:
can be registered.
User Name
Description
Setting Value
Description
Setting Value
Description
Setting Value
Item
(SMTP Auth / POP Before
Set a password for authentication. Up to 64 characters
SMTP) Authentication Method:
can be registered.
Password
- 41 -
2. Setting Up
Description
Setting Value
Advertisement
Table of Contents
