2 HOW TO MAKE COPIES
Copying from MPT on non-standard size paper
You can use non-standard size paper within the sizes shown on the right.
1
Place the original on the original glass.
2
Move the paper holding lever toward the outside.
Place paper with its copy side down on the MPT.
The height of the paper must not exceed the indicator on the side guides.
When you use more than one sheet of paper, fan the sheets well before placing them on the MPT. Be
careful not to cut your fingers when fanning.
Do not push paper into the entrance of the MPT. This could cause a paper misfeed.
3
Align the side guides to the paper length. Move the
paper holding lever toward the equipment.
When paper is placed, the menu for copying from MPT appears.
4
Press [CUSTOM PAPER] on the touch panel.
52
Copying from MPT
148 - 432 mm
( 5.8" - 17" )
100 - 297 mm
( 3.9" - 11.7" )
1
2