Table of Contents
Advertisement
2 HOW TO MAKE COPIES
When you copy highly transparent originals
When you copy highly transparent originals such as OHP films or
tracing paper, place a blank sheet, which is the same size as the
original or larger, over the original.
3
Lower the Original Cover or the RADF carefully.
When it is being closed, the scanner lamp flashes to detect the original size.
Book-type originals
You can place book-type originals on the original glass.
Do not place any heavy objects (4 kg (9 lb.) or over) on the original glass and do not press on it with force.
Breaking the glass could injure you.
1
Raise the Original Cover or the RADF.
2
Open the desired page of the original and place it with
its face down. Align it with the left rear corner of the
original glass.
When you make 2-sided copies from book-type originals in modes
such as book-type original to 2-sided copying or dual page copying,
align the center of the original on the yellow indicator line of the original
glass.
P.94 "Making a 2-sided copy from a book-type original"
P.110 "Dual Page"
28
Placing Originals
Advertisement
Table of Contents
