Copying from MPT
When you make copies on OHP film, sticker labels, envelopes, Thick 4 paper (only for ES9475 MFP Series), or non-
standard size paper, place the copy paper on the MPT. Copying from MPT is also recommended for copying on standard
size paper which is not set in any of the trays.
If you select the paper size, you can utilize various functions such as the automatic paper selection (APS) or the
automatic magnification selection (AMS). For details, see the following page:
P.196 "Copying Function Combination Matrix"
Open the MPT for copying from MPT.
If the paper is large, pull out the paper holder.
When placing or removing copy paper, move the paper holding lever toward
the outside. After this, move the paper holding lever back toward the
equipment.
If thick paper cannot be fed, printing takes a long time after feeding or the
quality is poor, turn over the paper and place it again as shown in the figure
or place fewer sheets.
2 HOW TO MAKE COPIES
Copying from MPT
41