Enterasys RoamAbout RBT-8100 Installation Manual page 37
Enterasys roamabout rbt-8100: install guide
Hide thumbs
Also See for RoamAbout RBT-8100:
- Release notes (28 pages) ,
- Customer release notes (21 pages) ,
- Quick start manual (2 pages)
Table of Contents
Advertisement
•
Domain name and DNS server address
You can enable the switch to use the MSS DHCP client to obtain this information from a DHCP
server in the local network where the switch will be deployed. Alternatively, you can statically
configure the information.
The IP address and DNS information are configured independently. You can configure the
combination of settings that work with the network resources available at the deployment site.
The following examples show some of the combinations you can configure.
You must configure an administrative certificate, to enable the switch to communicate with the
RASM server. You can configure a self‐signed certificate or install one from a certificate authority
(CA). These examples use a self‐signed certificate.
Example 1: Deployment Site Has DHCP and Local DNS
The deployment site in this example has a DHCP server. The switch is configured to use the MSS
DHCP client to obtain an IP address, default gateway address, DNS domain name, and DNS
server IP addresses.
1.
Configure a VLAN:
RBT-8100# set vlan 1 port 1
2.
Enable the DHCP client on VLAN 1:
RBT-8100# set interface 1 ip dhcp-client enable
3.
Enable the auto‐config option:
RBT-8100# set auto-config enable
4.
Create a self‐signed administrative certificate, to enable RASM or WebView to communicate
with the RoamAbout wireless switch.
RBT-8100# crypto generate key admin 1024
RBT-8100# crypto generate self-signed admin
Country Name:
State Name:
Locality Name:
Organizational Name:
Organizational Unit:
Common Name: remoteswitch1@example.com
Email Address:
Unstructured Name:
Self-signed cert for admin is
-----BEGIN CERTIFICATE-----
MIICUzCCAbygAwIBAgICA+cwDQYJKoZIhvcNAQEEBQAwNjELMAkGA1UEBhMCVVMx
CzAJBgNVBAgTAkNBMRowGAYDVQQDFBF0ZWNocHVic0B0cnB6LmNvbTAeFw0wMzA0
...
Lm8wmVYLxP56MpCUAm9O8C2foYgOY40=
-----END CERTIFICATE-----
5.
Save the configuration changes:
RBT-8100# save config
6.
Power off or restart the switch.
Wireless Switch Configuration Tasks
RBT-8100 Wireless Switch Installation Guide 3-5
Advertisement
Table of Contents
