Mounting In A Four-Post System - Enterasys RoamAbout RBT-8100 Installation Manual

Mounting in a Four-Post System

5. Install the chassis in a rack as shown in Figure
a.
b. Slide the chassis toward the rear of the rack until the front of the chassis brackets contact
Figure 2-5
2-4 Bracket Kit Installation
Caution: To help prevent personal injury, at least two people are required to lift the
chassis into the rack.
Advertencia: Para ayudar a prevenir alguna lesión personal, al menos dos personas
son requeridas para levantar el chasis y meterlo al rack.
Warnhinweis: Zum Schutz vor körperlichen Schäden, sollten sie mit min. zwei
Personen das Chassis in das Rack heben.
With the chassis front facing you, lift the chassis and position the chassis disks (A) so they
fit in the rear brackets (B).
the front posts.
Installing the Chassis in the Rear Brackets
2‐5.
B
A
A. Chassis disk
B. Rear bracket