Table of Contents
Advertisement
Settings – QoS Policy
Policy Priority This section identifies each policy:
•
•
•
•
•
•
•
Policy List
The list will display the details of all Policy Priority configuration data that you
have setup. You can modify it by clicking on a selected row.
Policy Name – Enter a suitable name. Generally, you should use the "Policy
Name" for network traffic.
Source Address – Define the source address of packets here. It has two
types, such as, IP address or MAC address. If you select IP address, you can
define the IP address range; otherwise you can define up to four MAC
addresses.
Destination Address – Define the destination address of packets here. The
explanation is the same as above.
Protocol Type – The field defines traffic packet type, i.e. ICMP, TCP or AH.
Source Port – Define the packet source port here.
Destination Port – Define the packet destination port here.
Priority Queue – Defines a packet if it meets all conditions defined above. It
will be implemented with some priority level.
Page 66
Advertisement
Table of Contents
