Mesh Group Setup - Edimax ER-1088 User Manual

Mesh Group Setup (Optional)
The Multi-WAN VPN Link Balancer not only provides VPN failover and backup but is also capable
of offering VPN load balance.
If you have setup IPSec policy on the "IPSec Policy Setup" web page, then you don't have to enter
IPSec policy setup again here. You can press the "Scan Policies" button to copy the IPSec Policy
into the Mesh Group Setup web page. You also can configure your IPSec Policy on the Mesh Group
web page by pressing the "Create" button. To use the VPN load balance option, it is necessary to use
a static IP.
For configuring Mesh Group Setup you can refer to the IPSec Policy Setup:
Figure 6-4: Mesh Group Setup
Page 61