9.
Select LAN & DHCP from the menu. You will see a screen like in the example below.
10.
If your LAN already has a DHCP Server and you wish to continue using it, the following
configuration is required:
• The DHCP Server function in the Multi-WAN VPN Link Balancer must be disabled. You will
find this setting in the LAN & DHCP screen.
• Your DHCP Server must be configured to provide the Multi-WAN VPN Link Balancer's LAN IP
Address as the "Default Gateway".
•
Your DHCP Server must provide correct DNS addresses to any connected PCs.
11.
Ensure these settings are suitable for your LAN:
• See the following table for details of each setting. For most situations, the default settings will
be suitable.
Figure 2-3: LAN & DHCP Setup
Page 11