Nat Setup - Edimax ER-1088 User Manual

NAT Setup

NAT (Network Address Translation) is the technology which allows one (1) WAN (Internet) IP address
to be used by multiple LAN users.
Settings – NAT Setup
NAT
Configuration
Figure 4-10: NAT Setup
•
NAT Routing – You can enable or disable NAT through the check box. If
you disable the NAT checkbox, it will act as a bridge or Static Router. Most
features will be unavailable.
•
TCP Timeout – Enter the desired value to use on each WAN port. The
default is 300
•
UDP Timeout – Enter the desired value to use on each WAN port. The
default is 120
•
TCP Window Limit – Enter the desired value to use on each WAN port.
The default is 0 (no limit).
•
TCP MSS Limit – Enter the required MSS (Maximum Segment Size) to
use on each WAN port. The default is 0 (no limit).
Page 43