Edimax ER-1088 User Manual page 20

Address This is for Static IP users only. Enter the address information (IP Address,
Information Subnet Mask, Gateway) provided by your ISP. If your ISP provides multiple IP
address, you can use the Multi-DMZ screen to assign any additional IP
addresses.
This is for PPPoE or PPTP users only.
PPPoE / PPTP
Dialup
•
•
•
Note:
There are additional PPPoE/PPTP options on the Port Options screen.
To use multiple PPPoE sessions on either port, configure settings in the
Advanced PPPoE screen.
DNS If using a Fixed IP address, you MUST enter at least 1 DNS address.
If using a Dynamic IP, PPPoE or PPTP; DNS information is optional.
•
Optional
•
•
Setup of the Multi-WAN VPN Link Balancer is now complete. PCs on your LAN must now be
configured. See the following section for details.
Enter the Username and Password provided by your ISP.
If using PPTP, enable the PPTP Connection checkbox and enter the IP
address of the PPTP server.
PPPoE Host name (Optional) – This field is used by a Host to uniquely
associate an access concentrator with a particular Host request.
Host name – This is required by some ISPs. If your ISP provided a Host
Name, enter it here. Otherwise, you can use the default value.
Domain name – This is required by some ISPs. If your ISP provided a
Domain Name, enter it here. Otherwise, you can use the default value.
MAC address – Some ISP records your MAC address (also called "Physical
address" or "Network Adapter address"). If so, you can enter the MAC
address expected by your ISP in this field. Otherwise, this should be left at
the default value.
Page 16