Quick Guide - Yaesu FR5DR Operating Manual

① Turning the Power ON
Install the charged battery pack and then
press and hold the Power switch.
② Inputting the Call sign
When turning the power ON for the first
time after purchasing, input the call sign of
your own station.
Input call sign may be changed from Setup
Menu [CALLSIGN] (page 68).
1. When turning the power ON for the first
time after purchasing, the call sign input
screen will be displayed.
Please enter your
Callsign.
(Max 10 letters)
2. Press the [F menu] key.
3. Input the call sign.
Rotate the DIAL knob to select each
character.
Touch to move the cursor to the
right.
4. Repeat step 3 to input the remaining
call sign characters.
Touch to move the cursor to the left.
Touch to erase the character at the
cursor position.
5. Press the PTT switch to conclude input-
ting.
Normal operation (VFO Mode) screen
will be displayed.
③ Selecting the Operating Band
Press the [BAND] key.
④ Tuning the frequency
Rotate the DIAL knob.
⑤ Adjusting the volume
Rotate the VOL knob to adjust the volume
to a comfortable level.
⑥ Adjusting the squelch setting
The squelch level may be adjusted to mute
the background noise when no signal is
received.
1. Press the SQL key.
2. Rotate the VOL knob to adjust the
squelch to a level at which the back-
ground noise is muted.
* When the squelch level is increased,
the noise is more likely to be silenced,
but it may become more difficult to
receive weak signals.
3. Press the SQL key to save the setting.
⑦ Selecting the
Communication Mode
The communication mode is automatically
selected to correspond to the signal being
received.
Touch [MODE] to manually select the com-
munication mode.
⑧ Transmitting/Receiving Signals
Transmitting
While pressing and holding the PTT
switch, speak into the microphone.
Receiving
Release the PTT to return to receive
mode.
Set the Bluetooth
The FT5DR/DE equipped with the Blue-
tooth function. To use a Bluetooth
set, refer to "Bluetooth
page 46 for setting.

Quick Guide

®
function
®
head-
®
Operation" on
3