Quick Guide - Yaesu FT-4VR Operating Manual

Quick Guide

Names and display of Controls
PTT Switch
MONI/T-CALL
Switch
Function Key
① Turning the Power ON
Rotate the until it clicks.
② Adjusting the volume
Rotate the .
③ Selecting VFO-A or B
Press the .
The operating mode changes between the
VFO-A and the VFO-B.
④ Tuning the frequency
Press the or
⑤ Adjusting the squelch setting
The squelch level may be adjusted to mute
the background noise when no signal is
received.
2
Normal operation (VFO Mode)
VFO-A
.

(Frequency up and down) Key
Operating Frequency
S Meter / PO Meter
1. Press the
press the (MONI/T-CALL switch).
2. Press the
squelch level.
* When the squelch level is increased, the noise
is more likely to be silenced, but it may become
more difficult to receive weak signals.
3. Press the
the setting.
⑥ Transmitting Signals
z Transmitting
Press the , then speak into microphone.
PWR/VOL Knob
Microphone
[# VFO ] Key
(Function key), then
or to adjust the
(Function key) to save