● Dual Band Screen
A-band and B-band are displayed in a top-down fashion.
Both bands are received simultaneously.
Press and hold the [A/B] key.
● Mono Band Screen
A-band or B-band is displayed.
Receives only the displayed band.
● Function Menu Screen (Press the [F menu] key)
Press the [F menu] key to displays the function menu screen.
Press the [BACK] key to return to the previous screen.
There are two function menus. Touch [FWD ] or [BACK
display to switch the screens.
Depending on the communication mode and settings, some functions may not operate
when the Menu item is touched.
Function Menu Screen 1
Touch and hold the frequency of the operation band
(white display) to display the numeric keypad screen for
frequency input.
Touch the sub-band (gray display) frequency to change
the operation band.
When both the operation band and the sub-band are re-
ceiving signals at the same time, the audio on the sub-
band receiver is automatically muted. Setup Menu: [TX/
RX] [3 AUDIO] [2 MUTE] : Allows setting the
muting level.
Touch and hold the frequency to display the numeric
keypad screen for frequency input.
The memory tag and battery voltage etc. are displayed
on the lower segment.
MODE
MODE
Touch
Touch
] at the bottom right of the
Function Menu Screen 2
9