Advertisement
29-1/2" (74.9 cm)
3-3/4" (9.5 cm)
25-3/4" (65.4 cm)
38" (96.5 cm) - 66" (167.6 cm)
2-1/5"
(6 cm)
36-1/4"
(92 cm)
12" (30.5 cm)
Rough-in - Wall Mount Electrical and Water Supply
NOTICE: The locations for the supply shut-off, electrical outlet, and docking station cord are suggested
locations. Make sure all installations adhere to applicable codes and standards.
NOTICE: Locating the supply stop behind the toilet will make it difficult to remove the back panel.
IMPORTANT! Do not install any items behind the toilet that will interfere with the lid when it is raised.
All decorative items should be at least 37 " (94 cm) high to allow clearance for the seat.
The remote docking station is equipped with a 16'(5M) power cord.
The supplied power cord is 56 " (142.2 cm) in length. Install the GFCI protected outlet within 56 "
(142.2 cm) of the toilet location.
The toilet is equipped with a motion sensor to automatically open the lid when movement is
sensed. Sensitivity can be adjusted using the User Interface.
The toilet is equipped with a motion sensor to automatically open the ring when the light is
interrupted. The sensor is located on the right side of the toilet. This sensor has a maximum range
of 20cm. Keep this area free of obstructions.
1/2 " OD compression supply stop outlet is required unless an adapter is used.
Kohler Co.
14-1/2"
(36.8 cm)
Remote Dock
5-15/16"
(15.1 cm)
4-1/16"
(10.4 cm)
2-1/4"
(5.7 cm)
15-5/8"
(39.7 cm)
C L Of Outlet
Front of Bowl
10-13/16" (27.5 cm)
41" (104.1 cm) -
66" (167.6 cm)
1/2" NPS
Supply
6"
(15.2 cm)
8" (20.3 cm)
5
2-5/8"
(6.7 cm) D.
25-1/4"
(64.1 cm)
12"
Finished Wall
(30.5 cm)
Power Cord
Reaches
56" (142.2 cm)
17-7/8"
(45.4 cm)
Outlet
2" (5.1 cm)
1195109-T01-F
Advertisement
