Mitsubishi Electric Mr. Slim PUHZ-ZRP35VKA Service Manual page 140

OPERATING PROCEDURE
13. Removing the power receiver
(1) Remove the service panel. (See Photo 1)
(2) Remove the top panel. (See Photo 1)
(3) R emove 2 front cover panel fixing screws (5 × 12) and
remove the front cover panel. (See Photo 4)
(4) R emove 4 back cover panel fixing screws (5 × 12) and
remove the back cover panel.
(5) Remove the electrical parts box. (See Photo 4)
(6) R emove 3 valve bed fixing screws (4 × 10) and 4 ball valve
and stop valve fixing screws (5 × 16) then remove the valve
bed.
(7) R emove 3 right side panel fixing screws (5 × 12) in the
rear of the unit then remove the right side panel.
(8) Recover refrigerant.
(9) Remove 4 welded pipes of power receiver inlet and outlet.
(10) Remove 2 receiver leg fixing screws (4 × 10).
Note: Recover refrigerant without spreading it in the air.
OCH527C
PHOTOS
Photo 11
Compressor
Receiver leg
(MC)
fixing screws
140
Inlet
Outlet
Power
receiver
Receiver
leg