Table of Contents
Advertisement
Chapter 3 Operation
Util (Utility)
Use the
menu to view and to set system parameters. (Also see Utility Menu on page 47.) This menu
U
TIL
includes the following submenus:
SOFTWARE REV
REINIT UNIT
ADDRESS
SET PASSCODE
KEYPAD
FACT RESTORE
Test
Use the
menu to initiate different types of unit tests and to view test results which are displayed in the
T
EST
LCD window. (Also see Test Menu on page 49.) The menu contains three submenus:
NETWORK TESTS
RUN SELF TEST
PORT TESTS
Test execution disrupts some normal operations. See the individual test menu descriptions
before executing a test.
30
Displays the version number of the current software revision level. This
information is required when requesting assistance from ADTRAN Customer
Service or when updates are needed.
Reinitializes the unit (runs a self-test). This menu does not restore the factory
default settings.
Use to view and change the current unit address used for control-port access.
Acceptable addresses are 0002 through 9999.
Sets a passcode for use with
Use to lock the front panel keypad so that no accidental changes are made to the
menus. Enter the passcode to unlock the keypad (see Set Passcode on page 48).
Restores factory default settings for all unit parameters.
Use to control the activation of loopbacks and the initiation of data test patterns.
Use to execute an internal self-test.
Use for testing the DTE (V.35) port.
© 2003 ADTRAN, Inc.
.
K
EYPAD
TSU LT User Manual
61203060L1-1A
Advertisement
Table of Contents
