Table of Contents
Advertisement
3)FACTORY RESTORE, SUBMENU OF 3)UTIL
Operation
7)PORT UTILITY, SUBMENU OF 3)UTIL
Operation
61200.089L2-1
This selection is used to restore the factory default
settings for all Dial Backup option module parameters.
To return the unit to the opening Main menu with all the
factory default settings restored, do the following:
1. Follow the standard operating procedure to access
the 3)UTIL menu items.
2. With the cursor on 3)FACT RESTORE, press
the Enter key.
The 7)PORT UTILITY submenu is used primarily to
access the display of the current software information
for each port installed in the unit. This information is
required when requesting assistance from ADTRAN
Technical Support or when updates are needed.
To display Figure 3-6 on the TSU 100, do the following:
1. Follow the standard operating procedure to access
the 3)UTIL menu items.
2. With the cursor on 7)PORT UTILITY, press the
Enter key. This displays the first available port.
DBU Interface Option Module User Manual
Chapter 3. Operation
Figure 3-6
Port Utility Submenu
19
Advertisement
Table of Contents
