Epson SureColor SC-F9330 Series User Manual page 32

SC-F9300 Series User's Guide
S
T
Tap lightly on both ends of the media, and check
if there is a difference in tension between the left
and right sides.
If there is a difference in tension, the media
becomes loose.
From the front of the printer, raise the media
loading lever, and correct the looseness in the
media.
Once the looseness is corrected, lower the media
loading lever.
Basic Operations
U
While holding the tabs of the media edge plate on
both sides, move the plate to the top edge of the
media.
Adjust so that the edges of the media are aligned
with the center of the round holes in the media
edge plates.
The media edge plates prevent the media from
riding up and keep fibers on the cut edge of the
media from touching the print head.
32