Outline; Features - Mitsubishi Electric FX3S Series User Manual

FX /FX /FX
3S 3G 3GC
Built-in Positioning Functions
1.

Outline

This chapter describes a general outline of the positioning modules. Note that the general outputs of the
FX /FX
3S
adapter are needed for positioning control.
1.1

Features

1) The general outputs of the FX
axes
2) If one high-speed output special adapter (FX
axes for the positioning operation. If 2 high-speed output special adapters are connected, the adapters
can control up to 4 axes for the positioning operation.
3) The FX
positioning control.
4) The general outputs of the FX
train of 100 kHz.
5) The FX
pulse train of 200 kHz.
6) The FX
train + direction" method and "forward/reverse rotation pulse train" method.
If the general outputs of the FX
3 axes , maximum
Servo amplifier (drive unit)etc.
1-axis
If FX -2HSY-ADP adapters are connected to the FX
3U
4 axes, maximum
Servo amplifier (drive unit)etc.
1-axis
*1. 2 independent axes in the FX
Downloaded from ManualsNet.com
/FX /FX PLC User's Manual - Positioning Control Edition
3U 3UC
/FX /FX /FX PLC (transistor output) and FX
3G 3GC 3U 3UC
*1
for positioning operations.
/FX /FX /FX /FX
3S 3G 3GC 3U
-2HSY-ADP high-speed output special adapter (differential line driver system) can output a
3U
-2HSY-ADP high-speed output special adapter can switch the output method between "pulse
3U
System
/FX
3S
*1
2-axes 3-axes
FX
2-axes 3-axes 4-axes
-ADP
3G
search engine
/FX /FX /FX /FX
3S 3G 3GC 3U 3UC
-2HSY-ADP) is connected, the adapter can control up to 2
3U
PLC positioning instructions (applied instructions) are used for
3UC
/FX /FX /FX /FX
3S 3G 3GC 3U 3UC
/ FX /FX
/FX PLC are used:
3G 3GC 3U 3UC
/ FX
FX /FX /FX
3S 3G 3GC 3U
PLC (transistor output)
PLC:
3U
-2HSY
3U
FX PLC
3U
2nd 1st
PLC (14-point and 24-point type) and FX
-2HSY-ADP high-speed output special
3U
PLC (transistor output) can control up to 3
PLC (transistor output) can output a pulse
Points and references
Number of controllable axes
...
To check the PLC model,
...
/FX
3UC refer to Section 1.3.
For a detailed description of
the positioning instructions,
...
refer to Chapters 6 to 11.
For a detailed description of
the input/output specifications,
...
refer to Section 2.4 and
Section 2.5.
For examples of connection,
...
refer to the Appendix.
Number of controllable axes
...
To check the PLC model,
...
refer to Section 1.3.
For a detailed description of the
positioning instructions, refer to
...
Chapters 6 to 11.
For a detailed description of the
input/output specifications, refer
...
to Section 2.4 and Section 2.5.
... For examples of connection,
refer to the Appendix.
/FX PLC.
3S 3GC
1 Outline
1.1 Features
A
B
Apx.
B - 3