Pulse Output Block [Fx 3U -1Pg, Fx 2N -1Pg(-E), Fx 2N -10Pg - Mitsubishi Electric FX3S Series User Manual

FX /FX /FX
3S 3G 3GC
Common Items
3.1.2 Pulse Output Block [FX
Number of control
Interpolation
Pulse output
Pulse output
method
Maximum
frequency
Acceleration/
deceleration type
Positioning range
Program language
Position data
Connection of
manual pulse
generator
Detection of
absolute position
(Reads out the
current value of
Others
*1.
*2.
*3.
A - 14
Downloaded from ManualsNet.com
/FX /FX PLC User's Manual - Positioning Control Edition
3U 3UC
3U
Model
axes
form
*1
Trapezoidal acceleration/deceleration,
approximate S-shaped acceleration/deceleration
Unit
-2,147,483,648 to +2,147,483,647
[×(Position data magnification
-2,147,483,648 to +2,147,483,647
[×(Position data magnification
-2,147,483,648 to +2,147,483,647
[×(Position data magnification
-2,147,483,648 to +2,147,483,647
[×(Position data magnification
ABS.)
• PLC input/output: 8 points occupied
(Points can be either input or output points.)
• During positioning operation, the operation
speed and/or target address can be changed.
Do not exceed the maximum rotation speed of the servo motor or the stepping motor.
The position data magnification sets the 1, 10,10
The positioning range can be set in the range from -2,147,483,648 to +2,147,483,647 pulses.
search engine
-1PG, FX -1PG(-E), FX
2N
FX -1PG
3U
1 independent axis
Transistor
"Pulse train + direction" method
"Forward/reverse rotation pulse train" method
200,000Hz
pulse, m, 10
*2
) pulse]
*2
) μm]
*2 -4
)×10 inch]
*2
) mdeg]
Sequence program (FROM/TO instruction, BFM direct designation)
1 point (set in sequence program)
Using the ABS instruction of the PLC
2
or 10
3 Comparison of Specifications
3.1 Comparison of Performance Specifications
-10PG]
2N
FX -1PG(-E)
2N
-
100,000Hz
Trapezoidal acceleration/deceleration
-4
inch, mdeg
-999,999 to +999,999
[× (Position data magnification
-999,999 to +999,999
*3
[× (Position data magnification
-999,999 to +999,999
*3
[× (Position data magnification
-999,999 to +999,999
*3
[× (Position data magnification
-
PLC input/output: 8 points occupied
(Points can be either input or output points.)
3
in parameters.
*2
) pulse]
*2
) m]
*2 -4
) ×10 inch]
*2
) mdeg]