Fx 3Uc Plc - Mitsubishi Electric FX3S Series User Manual

FX /FX /FX
3S 3G 3GC
Common Items
2.5 FX
3UC
FX
*1.
*2.
*3.
*4.
Note:
• Use the FX
the FX
• For details on the connectable special function units/blocks and system configuration, refer to the following
manual.
Downloaded from ManualsNet.com
/FX /FX PLC User's Manual - Positioning Control Edition
3U 3UC
PLC
PLC
3UC
B and C show the unit positions.
C B
(For installation details, refer to the manuals of special function units/blocks.)
Transistor output (Y000 to Y002)
C
FX -1PS-5V
3UC
C
FX -CNV-IF
2NC
The relay output type PLCs do not have pulse output.
The product connects with the servo amplifier via the terminal block, MIL connector (20 pins), or the
SSCNET dedicated connector.
FX -20SSC-H only connects with the servo amplifier applicable to SSCNET III.
3U
Up to 7 special function units/blocks can be connected to the FX
-1PS-5V (extension power supply unit) only if the 5V DC power supply unit incorporated in
3UC
PLC does not have enough capacity.
3UC
search engine
MIL connector (20-pin)
*1
B
POWER
ERROR
START
DOG PGO
FX -10PG X0 FP
X1
2N RP
f A CLR
f B
- Terminal board (M3)
- MIL connector (20-pin)
- SSCNET III dedicated
connector
Special function
block
Special function
unit
For details, refer to the FX
For details, Refer to the FX
Refer to the FX
2 Unit Connection
Servo motor
Stepping motor
*2
*2
*2
-20SSC-H USER'S MANUAL.
3U
-32MT-LT(-2) PLC.
3UC
Hardware Edition.
3UC
Hardware Edition.
3UC
2.5 FX3UC PLC
A
B
*3
or
Apx.
A - 11