Introduction Of Products Needed For Positioning; List Of Models - Mitsubishi Electric FX3S Series User Manual

FX /FX /FX
3S 3G 3GC
Common Items
1.2

Introduction of Products Needed for Positioning

To control the positioning operation, use the positioning functions incorporated in the main unit (including the
special adapters), and the special functions units/blocks. The functions, however, depend on the product(s)
being used. Select the optimum product(s) for the purpose of use.
1.2.1

List of Models

The products needed for positioning are shown in the following table:
1. Main unit (transistor output) and special adapter
Model
Main unit (transistor output)
FX
3S
FX
3G
(14-point,
24-point type)
FX
3G
(40-point,
60-point type)
FX
3GC
FX /FX
3U
PLC
Special adapter
FX -2HSY
3U
-ADP
*1.
*2.
*3.
*4.
A - 4
Downloaded from ManualsNet.com
/FX /FX PLC User's Manual - Positioning Control Edition
3U 3UC
Number of
axes
2-axes
PLC
10
(independent)
PLC
2-axes
10
(independent)
PLC
3-axes
10
(independent)
2-axes
PLC
10
(independent)
3-axes
3UC
10
(independent)
*4
2-axes
10
*3
(independent)
Do not exceed the maximum rotation speed of the servo motor or the stepping motor.
The minimum frequency set by the PLSY instruction or PLSV instruction is "1 Hz".
For details on the PLSY instruction, refer to the programming manual.
Can only be connected to the FX
Connection of 1 adapter can control 2 axes. Connection of 2 adapters can control up to 4 axes.
search engine
Frequency
Unit Output form
*1
(Hz)
*2
pulse Transistor
to 100,000
*2
pulse Transistor
to 100,000
*2
pulse Transistor
to 100,000
*2
pulse Transistor
to 100,000
*2
pulse Transistor
to 100,000
Differential
*2
pulse
to 200,000
line driver
For details on the PLSV instruction, refer to Chapter 10.
PLC.
3U
1.2 Introduction of Products Needed for Positioning
Output method
"Pulse train + direction"
method
"Pulse train + direction"
method
"Pulse train + direction"
method
"Pulse train + direction"
method
"Pulse train + direction"
method
"Pulse train + direction"
method or "forward/
reverse rotation pulse
train" method
1 Introduction
Reference
B. Built-in
Positioning
Function
B. Built-in
Positioning
Function
B. Built-in
Positioning
Function
B. Built-in
Positioning
Function
B. Built-in
Positioning
Function
B. Built-in
Positioning
Function