Samsung HOTEL DCS User Manual page 36

Hotel User Guide
• If a room requires maintenance, this can also be entered into the
system. Again, the room cannot be checked in to until mainte-
nance has been carried out.
VIEWING THE STATUS OF ROOMS (RSV)
n
To view the status of rooms, your keyphone must have one or more
Room Status View (
key programmed on one or more add-on-modules (
ing on the number of rooms .
N : To view and change the status of rooms using the HOTEL key, see section 3,
OTE
Using the HOTEL
PROCEDURE
•
If you have a single
Press the
RSV
require (see table,
For example, if you press
to occupied rooms will light.
•
If you have keys marked '
Press the relevant
all the keys assigned to occupied rooms will light.
CHANGING THE STATUS OF A ROOM
n
Using the Administrator's Keyphone
Use the
HOTEL
istrator's phone. See section 3,
keys. Each room also requires a dedicated
RSV)
Key.
RSV
key and then press the number 0–4 for the status you
above).
RSV
RSV0–RSV4
key to view and change room status from the Admin-
key on your phone
followed by 1, all the keys assigned
RSV0'–'RSV4'
key. For example, if you press
Using the
HOTEL
Basic Administration
s) depend-
AOM
on your phone
Key.
,
RSV1
29