Panasonic AJ-CX4000 Operating Instructions Manual page 85

[1920×1080p]
[1920×1080i]
[1920×1080PsF]
[1280×720p]
[720×480i]
[720×576i]
(Factory setting: [1920×1080i])
@
NOTE
t For the combinations that can be set, refer to "Format that can be output from the <SDI OUT2> terminal" (page 180).
[3G-SDI OUT]
Sets the format of the 3G-SDI signal output from the <SDI OUT2> terminal.
Can be set when the 3G-SDI signal is output.
[LEVEL-A]
[LEVEL-B]
(Factory setting: [LEVEL-B])
[SD-SDI EDH]
Sets whether to superimpose EDH when output from the <SDI OUT2> terminal is the SD signal (480i and 576i).
[ON]
[OFF]
(Factory setting: [ON])
[SDI REC REMOTE]
Sets if the recording operation against the external equipment connected to the <SDI OUT2> terminal (such as recorder) is to be controlled or not.
[ON]
[OFF]
(Factory setting: [OFF])
@
NOTE
t This cannot be set when set to the [RECORDING] menu → [REC FUNCTION] → [REC MODE] → [INTERVAL].
[SDI OUT ZEBRA]
Sets whether to superimpose the zebra signal to the output from the <SDI OUT2> terminal.
The setting of the zebra signal is in accordance with the following setting in the [VIDEO OUT/LCD/VF] menu → [EI ASSIST].
f [ZEBRA1 DETECT], [ZEBRA2 DETECT], [ZEBRA2]
[ON]
[OFF]
(Factory setting: [OFF])
[SDI OUT HDR]
Sets the signal to output from the <SDI OUT2> terminal.
[SDR]
[HDR]
(Factory setting: [HDR])
@
NOTE
t The setting is fixed to [SDR] when set to the following menu.
- [VIDEO OUT/LCD/VF] menu → [SDI OUT2] → [OUT FORMAT] → [720×480i]
- [VIDEO OUT/LCD/VF] menu → [SDI OUT2] → [OUT FORMAT] → [720×576i]
t The camera image is output in the standard dynamic range when the [SCENE FILE] menu → [GAMMA MODE SEL] is set to anything other than
[HLG].
[MARKER SW]
Marker is displayed in the output from the <SDI OUT2> terminal.
The items that can be set are as follows.
f [ON], [OFF]
(Factory setting: [OFF])
[SDI OUTPUT ITEM]
Sets the character content to superimpose on the output signal of the <SDI OUT1>/<SDI OUT2>/<HDMI> terminals.
[MENU ONLY]
Chapter 4 Operation — Menu settings
Outputs in 1920×1080p.
Outputs in 1920×1080i.
Outputs in 1920×1080PsF.
Outputs in 1280×720p.
Outputs in 720×480i.
Outputs in 720×576i.
Selects the LEVEL-A method.
Selects the LEVEL-B DL method.
Superimposes.
Does not superimpose.
Controls the recording operation of the external equipment.
Does not control the recording operation of the external equipment.
Superimposes.
Does not superimpose.
Outputs in the standard dynamic range.
Outputs in the high dynamic range.
Superimposes only the menu when displaying the menu. Normally, nothing is superimposed.
– 85 –