Table of Contents
Advertisement
Chapter 9 Network Connection — Network connection
Network connection
The camera can be connected to a network via a wireless LAN or wired LAN.
Also, high speed network connection is possible when the camera is connected to a wireless LAN or wired LAN by using the bonding device.
For details on wireless module and bonding device that can be connected, refer to the support desk at the following website.
https://pro-av.panasonic.net/
Attach the wireless module (optional) to the <USB2.0 HOST> terminal to use a wireless LAN.
Connect a LAN cable to the <LAN> terminal on the rear side to use wired LAN.
IEEE802.11a/g/n/ac
1000BASE-T/100BASE-TX/10BASE-T
@
NOTE
t For the cable to be connected to the <LAN> terminal, use a category 7 LAN cable.
Available functions
When the camera is connected to a network, the following functions are available.
f Connecting to CX ROP application
f Streaming function
f NDI|HX function
f P2 Cast link
– 188 –
Advertisement
Table of Contents
