Power supply
A battery or an external DC power supply can be used as the power supply for the camera.
To use a battery
Connection of the following batteries to the camera has been verified.
r Anton/Bauer battery
Dionic/Hytron/Titon/Digital series
@
NOTE
t Other batteries are supported by selecting the [OTHERS] menu → [BATTERY] → [ONBOARD BATTERY] → [BATTERY SEL] → [other]. Use of
batteries that are already verified as connectable to the camera is recommended.
t Before you use a battery, charge it with a battery charger. (For details on charging, refer to each instruction operation.)
t When using the light (Ultralight 2), using a battery of 90 Wh or more is recommended.
Attaching and setting the battery
Using Anton/Bauer batteries
1
Mount the Anton/Bauer battery.
2
Insert the battery terminal and slide in the direction of the arrow.
3
Set the battery type.
Select the type of the battery in the [OTHERS] menu → [BATTERY] → [ONBOARD BATTERY] → [BATTERY SEL].
@
NOTE
t When removing the battery, keep the release lever of the battery holder completely down, slide the battery in the opposite direction of when you
mounted it.
Chapter 3 Preparation — Power supply
Anton/Bauer battery
– 34 –
Release lever