Table of Contents
Advertisement
Menu settings
[THUMBNAIL] menu
Performs confirmation or deleting of the recording clip.
This menu can be set when the thumbnail screen is displayed.
[PLAYBACK]
Sets the playback of recorded clips.
[CLIP SEL]
Selects a clip to be displayed on the thumbnail screen.
It is always displayed in [ALL SLOT] when switched from the camera image screen to the thumbnail screen.
[ALL SLOT]
[SLOT1]
[SLOT2]
[SLOT3]
[SAME FORMAT]
(Factory setting: [ALL SLOT])
[RESUME PLAY]
Select if the playback is to start from the position the playback has stopped or not.
[ON]
[OFF]
(Factory setting: [OFF])
[CLIP]
The clip can be protected or copied to a different memory card.
[PROTECT]
[DELETE]
[COPY]
[REPAIR]
[RE-CONNECT]
[INFORMATION]
@
NOTE
t Clips in P2 format cannot be protected.
t Clips in MOV format cannot be copied.
[DISPLAY]
Sets the display of the thumbnail screen.
[DATA]
Selects the content to be displayed in the time code display area.
[START TC]
[CLIP NAME]
(Factory setting: [START TC])
[CAMERA] menu
Sets the basic camera function.
This menu cannot be set when the thumbnail screen is displayed.
Chapter 4 Operation — Menu settings
Displays all the clips recorded on every memory card in each card slot.
Displays only the clips recorded on the memory card in card slot 1.
Displays only the clips recorded on the memory card in card slot 2.
Displays only the clips recorded on the memory card in card slot 3.
Displays only the clips recorded in the same format as the system format.
Clips recorded in the same format means that each item of the [SYSTEM] menu → [FREQUENCY]/[FILE FORMAT]/[REC
FORMAT]/[AUDIO SAMPLE RES.] matches the current setting status.
Plays back from the position where playback has stopped.
Always starts the playback from the beginning of the clip.
[SELECT]
[ALL]
[SELECT]
[ALL]
[SELECT]
[SELECT]
Displays the time code value at the start of the recording.
Displays clip names.
Protect the clip so it is not mistakenly deleted.
Select the clip to protect, and set the protect.
Deletes all the clips displayed in the thumbnail screen.
The clip that is not displayed in the thumbnail screen is not deleted.
Select the clip to delete, and delete it.
Copies all clips to a different memory card.
Selects the clip to copy, and copies the clip to a different memory card.
Select [SLOT2→SLOT1] or [SLOT3→SLOT1] to copy a clip recorded spanning over
card slot 2 and card slot 3 to the expressP2 card in the card slot 1 while recording in P2
format.
An error occurs at the start of the copy process if [SLOT2→SLOT3] or [SLOT3→SLOT2]
is selected.
Repairs a clip displaying
caused by the sudden power loss, etc., during recording in
P2 format.
While recording in P2 format, a clip recorded over multiple microP2 cards may not be
recognized as a continuous clip, and may display
Restores as a continuous clip by selecting the clips to re-connect.
Displays the detailed information of the clip.
– 62 –
.
Advertisement
Table of Contents
