TECHNICAL DATASHEET
Force-GT DIN Rail Power Supply
24 V 960 W 3 Phase / DRF-24V960W3GBA
Operating Mode
DC Input Operation
Step 1.
Use a battery or similar DC source.
Step 2.
Connect either connections of +pole and -pole to L1/L2/L3 as below.
•
+pole to L1 and –pole to L2
+pole to L1 and –pole to L3
•
•
+pole to L2 and –pole to L1
+pole to L2 and –pole to L3
•
•
+pole to L3 and –pole to L1
+pole to L3 and –pole to L2
•
Step 3.
Connect the PE terminal to an earth wire or to the machine ground.
All parameters are specified at 25°C ambient and AC input 3x unless otherwise indicated.
14
www.DeltaPSU.com (May 2022, Rev. 00)
Fig. 4
DC Input Operation Connection Diagram