On/Off/Wash Toggle Switch; Ude0065/Ude0080 - Welbilt Manitowoc NEO UDE0065A Technician's Handbook

ON/OFF/WASH TOGGLE SWITCH

UDE0065/UDE0080

FUNCTION
The switch is used to place the ice machine in ON, OFF or
WASH mode of operation.
SPECIFICATIONS
Single-pole, double-throw switch. The switch is connected
into a varying low D.C. voltage circuit.
CHECK PROCEDURE
NOTE: Because of a wide variation in D.C. voltage, it is not
recommended that a voltmeter be used to check toggle
switch operation.
1. Inspect the toggle switch for correct wiring.
2. Isolate the toggle switch by disconnecting all wires
from the switch, or by disconnecting the Molex
connector from the control board.
3. Check across the toggle switch terminals using a
calibrated ohmmeter. Note where the wire numbers
are connected to the switch terminals, or refer to the
wiring diagram to take proper readings.
Part Number 000014797 Rev02 05/19 195