Important Notes On Installation; Distance Limitations; Checklist Of Items - Avaya Definity Callmaster VI Installation And User Manual

INSTALLING THE CALLMASTER VI VOICE
TERMINAL

Important Notes on Installation

All wiring between the DEFINITY ECS and the CALLMASTER VI voice
terminal including the line cord, must consist of twisted pairs.
Twisted-pair wiring makes lines less sensitive to crosstalk. The line
cord must be a D8W, which consists of four twisted pairs, or a Lucent
Technologies-approved equivalent.
Failure to use twisted-pair wiring may result in inadequate
performance of the terminal and also may contribute to line problems.

Distance Limitations

The distance that the CALLMASTER VI must be from the
DEFINITY ECS is determined by the diameter of the wire. See the
following specifications:
Within 5,500 feet for 22-gauge wire
Within 3,500 feet for 24-gauge wire
Within 2,200 feet for 26-gauge wire.
WARNING: Failure to follow these instructions can cause damage to
the terminal or cause the associated DEFINITY ECS circuit pack to
remove power to the terminal. In either case, the terminal will not
function correctly.

Checklist of Items

Before beginning the installation, check your package contents against
the list of items in Table 1. To order accessories for your
CALLMASTER VI voice terminal, call Lucent Technologies at
1-800-451-2100. For international ordering, call your Lucent
Representative or Distributor for assistance.
Item
CALLMASTER VI
Designation Strips
Line Cord
Table 1: Checklist Of Items
Description
Digital voice terminal
Paper punch-outs
7 foot, D8W line cord
3