3.17.1 Networking Status Submenu
The Networking Status submenu contains settings for
OnCuer
Plus. See the OnCue Plus Software
Operation Manual for information about the appropriate
network settings for OnCue Plus.
Networking- - >
Information
Figure 3-18 Network Status Submenu
44
Section 3 RDC2 Controller Operation
If DHCP is enabled, IP parameters are not displayed. If
DHCP is disabled (i.e., if a static IP address is used), the
IP parameters are displayed.
To enable or disable DHCP and change the IP settings,
go to the Networking Configuration menu. See
Section 3.17.2.
Networking- - >
Status
OnCue Status:
Connected
DHCP:
Enabled
IP Address:
###.###.###.###
Subnet Mask:
###.###.###.###
Gateway:
###.###.###.###
DNS 1:
###.###.###.###
DNS 2:
###.###.###.###
Ethernet Status:
Disconnected
OnCue Server:
###.###.###.###
<- - Return
tp6804
TP-6905 9/21