3.17.1 Networking Status Submenu
The Networking Status submenu contains settings for
OnCuer Plus.
See the OnCuer Plus Software
Operation Manual for information about the appropriate
network settings for OnCuer Plus.
Networking---->
Information
Figure 3-18 Network Status Submenu
TP-7102 4/18
If DHCP is enabled, IP parameters are not displayed. If
DHCP is disabled (i.e., if a static IP address is used), the
IP parameters are displayed.
To enable or disable DHCP and change the IP settings,
go to the Networking Configuration menu.
Section 3.17.2.
Networking---->
Status
OnCue Status:
Connected
DHCP:
Enabled
IP Address:
0.0.0.0
Subnet Mask:
0.0.0.0
Gateway:
0.0.0.0
DNS 1:
0.0.0.0
DNS 2:
0.0.0.0
Ethernet Status:
Disconnected
OnCue Server:
0.0.0.0
<---- Return
Section 3 RDC2 Controller Operation
See
tp7102
43