Belkin F1DN108K-3 User Manual page 38

aPPendICes
SECTIONS
Table of Contents
loading a Configuration file
• Click on the "Select a new configuration file"
• Browse to your .kmc configuration file
• Click on "Update KM"
After the .kmc file is loaded, the following screen will show:
Figure 2 – KM Loading Utility capture – file selected and loaded
After loading is complete, restart the KM by disconnecting and then
reconnecting power. Reconnect the mouse back to the mouse port and the
new configuration will apply.
Belkin Secure 4/8 port KM Switch User Manual
®
1 2
Loaded File Parameters
36
3 4
KM loader Troubleshooting and support
The KMC Loader utility communicates with the KM switch to load the
configuration file.
The two most common errors when using the loading utility are:
• Configuration file incorrectly formatted
• No Communication with KM switch
When loading a wrong configuration file the Loading Utility will report the
issue if possible and will direct the user to load another file.
To avoid this make sure the files you have loaded were created with the KMC
Creator configuration tool and that it was not manually modified in any way.
Figure 3 – KM Loading Utility capture – File not correct
5 6 7