Belkin F1DN108K-3 User Manual page 31

aPPendICes
SECTIONS
Table of Contents
step 1 – Create a new Project
Each KM configuration file is called a "KM Configuration Project". For every
setup you will be required to create a new project. Click "Back" to return to
the previous stage, at any point during the configuration process.
• Click on "New Project"
Belkin Secure 4/8 port KM Switch User Manual
®
1 2
step 2 – enter Project details
Please enter the requested information in the following manner:
• Project name – The name can be a combination of English characters
• Product Model – The product model can be found on the back sticker
• Mouse speed – This is the default mouse speed for all systems.
• Mouse acceleration – Same as above.
• number of Computers – The total numbers of computers that will be
• Click "Next Step"
29
3 4
or numbers. It is advised to use a name that will be reflective of the
configuration for example: "Dealer 3 5 monitors", "Generic Workstation
7". The project name can be read from the KM after loading.
of the KM switch. The Belkin Secure KM can both support two to four
computers.
Change the mouse speed on each computer will not affect the KM
mouse speed.
connected to the KM for this configuration.
5 6 7