Belkin F1DN108K-3 User Manual page 36

aPPendICes
SECTIONS
Table of Contents
example 4 – The two setups below are identical except that on the right
setup, the user chose to prevent the mouse cursor from moving from:
Computer 2, Display2 to Computer 1, Display 1.
This was done by clicking on the Yellow area between the monitors.
Multi displays rules
• Computers with multi displays Rule #1 – When one of the computers is
configured with multi displays, the setup of those displays connected
to the same PC must be similar to that configured on the MS setup.
• Computers with multi displays Rule #2 – All displays connected to
the same PC must be stuck to one another. It is impossible to have
distance between two displays connected to the same PC.
Belkin Secure 4/8 port KM Switch User Manual
®
1 2
step 6 – Complete setup
Once ready the administrator will press the Complete Setup bottom.
A file with an extension ending in ".kmc" will be generated.
Please refer to Appendix B for instructions on how to upload the .kmc
configuration file to the target KM Switch/Switches.
34
3 4 5 6 7