FPI P36 Owners & Installation Manual page 43

Zero clearance direct vent gas fireplace
Table of Contents

Advertisement

INSTALLATION
9)
Place Log 02-52 between Logs 02-51 and 02-49 and on
the indentation on Log 02-54. The bottom right end sits
behind the rear grate tab.
Use the indentation in log 02-54 to
locate log 02-52.
Photo shows rear
grate tab. Log 02-51
was removed to
show the positioning
of Log 02-52.
02-50
FPI P36-4 Zero Clearance Direct Vent Gas Fireplace
02-49
02-52
02-51
02-54
02-52
Rear
02-54
Grate
Tab
02-49
02-55
02-53
10) Place the embers on the front of the burner tray in the
places shown on the photo.
Separate platinum embers and place on the front burner on
and around the embers. Avoid stacking platinum embers.
Platinum embers may be placed over burner ports.
Place embers in these 3 locations on the burner tray.
11) Test fi re to ensure proper light off (make sure fl ame fl ows
smoothly from one end of burner to the other). If there is
any fl ame hesitation, check that area for any blockage of
the burner ports.
12) Install fl ush glass and bay glass (if used) as per instruc-
tions in this manual.
02-52
02-51
02-54
43

Advertisement

Table of Contents
loading

This manual is also suitable for:

P36-ng4P36-lp4

Table of Contents