Threading The Upper Looper - Janome 1110DX Instruction Book

8
7
1
2
1
2
3
4
5
6
1
2

• Threading the Upper Looper

Place a spool of thread on the rear right spool pin.
The points to thread for upper looper are marked
*
in red.
A convenient threading chart is placed on the
*
machine body inside the looper cover.
1. Draw the thread through the thread guide second
from the right from back to front.
1
Thread guide
2. Pass the thread through the holes in the second
row from the right of thread guide plate as
illustrated.
2
Thread guide plate
42