Oiling The Machine - Janome AT2000D Instruction Book

z x c v
q
w
e

Oiling the Machine

CAUTION
Make sure to turn the power switch off before oiling
the machine.
NOTE:
It is recommended to apply oil once a week for normal
use or once every 10 hours for continuous use.
z Apply a few drops of fine quality sewing machine oil to
the parts indicated with arrows.
q Drip a few drops of oil into the hole in the top
cover
w Open the lopper cover and apply oil to the
moving parts of the upper looper and the lower
looper.
e Open the side cover and apply oil to the moving
parts of the upper knife.
x Turn the handwheel toward you several times.
c Close the looper cover and the side cover.
With the machine unthreaded, place a scrap of fabric
under the presser foot and run the machine for a few
minutes.
v Wipe away any oil which appears.
CAUTION
Never inject oil into the holes for the looper threader,
the upper looper tip, or the lower looper tip.
Hole of pipe
55
Threader hole