Sewing Corners - Janome AT2000D Instruction Book

z
x c v
z x
r
e
q
c v
q
w
e
r
t
w
w
w

Sewing Corners

Outer corners
z Trim three corners (other than the starting point) 3 cm
as illustrated.
q Starting point
w Cutting line
e Trimmed corner
r 3 cm
x When you reach the next corner, stop the machine.
Raise the needle and the presser foot.
Remove the threads from the chaining finger and turn
the fabric.
Align the cutting line with the upper knife.
t Upper knife
c Lower the presser foot lifter.
v Continue to sew from where the previous stitches on
the corner ended.
Inner corners
z Cut the inner corner as illustrated.
q Inner corner
x Sew and stop 3 cm before the inner corner.
w Cutting line
e 3 cm
r Cutting allowance
c Turn the fabric so that the cutting lines are straight
and insert the fabric under the foot.
v Continue to sew.
51