DIR-615 Wireless N300 Router
User Manual
Back Panel
Name
9V=0.6A
WAN
LAN 1-4
WPS/RESET
The device is also equipped with two external non-detachable Wi-Fi antennas.
Figure 2. Back panel view.
Power connector.
A port to connect
to a cable or DSL modem or to a private Ethernet line
(it is recommended to use the cable included in the delivery package).
4 Ethernet ports to connect computers or network devices.
A button to set up a wireless connection (the WPS function) and to
restore the factory default settings.
To use the WPS function: with the device turned on, push the button and
release. The WLAN/WPS LED should start blinking slowly.
To restore the factory defaults: with the device turned on, push the
button, hold it for 10 seconds, and then release the button.
Page 11 of 176
Description
Overview