Selecting Operation Mode; Router - D-Link DIR-615/X User Manual

DIR-615 Wireless N300 Router
User Manual

Selecting Operation Mode

Select the needed operation mode and click the NEXT button.

Router

In order to connect your device to a wired ISP, on the Device mode page, from the Connection
method list, select the Wired connection value. Then from the Work mode list select the
Router value. In this mode you can configure a WAN connection, set your own settings for the
wireless network, configure LAN ports to connect an STB or VoIP phone, and set your own
password for access to the web-based interface of the device.
In order to connect your device to a wireless ISP (WISP), on the Device mode page, from the
Connection method list, select the Wi-Fi value. Then from the Work mode list select the
WISP Repeater value. In this mode you can connect your device to another access point,
configure a WAN connection, set your own settings for the wireless network, and set your own
password for access to the web-based interface of the device.
Figure 36. Selecting an operation mode. The WISP Repeater mode.
Figure 35. Selecting an operation mode. The Router mode.
Page 41 of 176
Configuring via Web-based Interface