DSL-2750U Wireless N300 ASDL2+ Router with Ethernet WAN Support
User Manual
Back Panel
Port
RESET
WPS/WLAN
ON/OFF
POWER
Figure 2. Back panel view.
A button to restore the factory default settings.
To restore the factory defaults, push the button (with the device turned on),
hold it for 10 seconds, and then release the button.
A button to set up a wireless connection (the WPS function) and
enable/disable the wireless network.
To use the WPS function: with the device turned on, press the button and
immediately release it. The WPS LED should start blinking.
To disable the router's wireless network: with the device turned on, press
the button, hold for 7 seconds, and release. The WLAN LED should turn
off.
A button to turn the router on/off.
Power connector.
Page 11 of 173
Description
Overview