DIR-615 Wireless N300 Router
User Manual
System Log
On the Management / System log page, you can set the system log options and configure
sending the system log to a remote host.
Figure 125. The Management / System Log page. The Settings tab.
To enable logging of the system events, go to the Settings tab and move the Enable switch to the
right. Then specify the needed parameters.
Parameter
Type
Level
Server
Port
Select a type of logging from the drop-down list.
Local: The system log is stored in the router's memory. When
•
this value is selected, the Server and Port fields are not
displayed.
Remote: The system log is sent to the remote host specified
•
in the Server field.
Local and remote: The system log is stored in the router's
•
memory and sent to the remote host specified in the Server
field.
Select a type of messages and alerts/notifications to be logged.
The IP or URL address of the host from the local or global network,
to which the system log will be sent.
A port of the host specified in the Server field. By default, the value
514 is specified.
Page 151 of 176
Configuring via Web-based Interface
Description