Table of Contents
Advertisement
DIR-615 Wireless N300 Router
User Manual
Administration
On the Management / Administration page, you can change the password for the administrator
account used to access the web-based interface of the router and to access the device settings via
TELNET, restore the factory defaults, backup the current configuration, restore the router's
configuration from a previously created file, save the changed settings to the non-volatile memory,
reboot the device, change the web-based interface language, or configure automatic reboot of the
device on a schedule.
In order to change the password for the administrator account, in the User section, enter a new
password in the New password and Password confirmation fields. Use digits, Latin letters
(uppercase and/or lowercase), and other characters available in the US keyboard layout.
Show icon (
) to display the entered values.
Remember or write down the new password for the administrator account. In case of losing
!
the new password, you can access the settings of the router only after restoring the factory
default settings via the hardware WPS/RESET button . This procedure wipes out all
settings that you have configured for your router.
To change the web-based interface language, select the needed value from the Language drop-
down list.
4 0-9, A-Z, a-z, space, !"#$%&'()*+,-./:;<=>?@[\]^_`{|}~.
Figure 127. The Management / Administration page.
Page 153 of 176
Then click the SAVE button.
Configuring via Web-based Interface
4
Click the
Advertisement
Table of Contents
