Wi-Fi Client - D-Link DIR-615/X User Manual

DIR-615 Wireless N300 Router
User Manual

Wi-Fi Client

This configuration step is available for the WISP Repeater, Repeater, and Client modes.
1. On the Wi-Fi Client page, click the WIRELESS NETWORKS button and select the
network to which you want to connect in the opened window. When you select a network,
the Network name (SSID) and BSSID fields are filled in automatically.
If you cannot find the needed network in the list, click the UPDATE LIST icon (
2. If a password is needed to connect to the selected network, fill in the relevant field. Click the
Show icon (
If you connect to a hidden network, enter the network name to the Network name (SSID) field.
Then select a needed value from the Network authentication list and then, if needed, enter the
password in the relevant field.
When the Open or WEP authentication type is selected, the following settings are displayed on the
page:
Parameter
Enable encryption WEP
Default key ID
Encryption key WEP as
HEX
) to display the entered password.
Figure 41. The page for
For Open authentication type only.
To activate WEP encryption, move the switch to the right. Upon that
the Default key ID drop-down list, the Encryption key WEP as
HEX switch, and four Encryption key fields are displayed on the
page.
The number of the key (from first to fourth) which will be used for
WEP encryption.
Move the switch to the right to set a hexadecimal number as a key
for encryption.
Page 45 of 176
configuring the Wi-Fi client.
Description
Configuring via Web-based Interface
).